Check your speedWhatmask runs in a DOS shell (Command Prompt).
Whatmask is a small C program that will help you with network settings.
Whatmask can work in two modes. The first mode (which is how prior versions worked) is to invoke Whatmask with only a subnet mask as the argument. In this mode Whatmask will echo back the subnet mask in three formats, plus the number of useable addresses in the range.
Netmask Notations supported:
Name Example --------------------------------- CIDR /24 Netmask 255.255.255.0 Wilcard Bits 0.0.0.255The above notations are all identical. CIDR notation commonly has a "/" in front of the number (representing the number of bits). Whatmask can accept these notations with or without a slash. This notation is used more and more recently. A lot of popular routers and software support this notation.
Netmask notation is pretty much the standard old-school way of doing it. It is supported by most systems (Un*x, Win, Mac, etc.).
Wilcard bits are similar to the netmask, but they are the logical not of the netmask. This notation is used by a number of popular routers (and nobody knows why...).
To use Whatmask in the original mode simply type "whatmask
To find out more about subnets and netmasks see the References section below.
To use Whatmask in its second mode execute Whatmask with any ip address within the subnet, followed by a slash ('/'), followed by the subnet mask in any format. (e.g. 192.168.0.23/255.255.255.224, or 192.168.0.23/27)
Whatmask will echo back the following:
- The netmask in the following formats: CIDR, Netmask, Wildcard Bits
- The Network Address
- The Broadcast Address
- The number of Usable IP Addresses
- The First Usable IP Address
- The Last Usable IP Address
Did you find this download useful?
9 out of 18 users found this download useful
